Yamaha pmn - Manual (Page 122)

E-
116
Problem
The remote control is low on
memory.
The TV goes blank or the input
source changes.
The configuration file is corrupted.
The remote control displays one of
the following error messages:
• Can’t open configuration file
• Configuration file error
• No configuration file found
• Invalid configuration file version
Cause
The Device menu item might be programmed to
switch the input source.
Remedy
The remote control displays a message indicating it is
time to clean up the memory. The remote control will
do this by permanently removing the components and
macro/timer groups you have deleted. Clearing up
memory can take 10 minutes or longer. Never remove
the batteries during the process.
Operate the component without affecting the input
source (see page __).
You have to revert to the original configuration. All
your customized commands, components and macros
are lost. You must reprogram your remote control.
Please contact your dealer or the YAMAHA customer
service.
TROUBLESHOOTING