Yamaha pmn - Manual (Page 16)

E-
10
CONTROLS AND FUNCTIONS
■ Turning on the display
Tap the screen gently with your finger or a blunt, soft
object like a pencil eraser.
The display is activated and the Home menu appears.
Notes
• If the display stays blank or becomes black, adjust the contrast
using CONTRAST +/– on the left side of the remote control.
• If another panel is displayed, tap the Home button.
• The remote control shuts down automatically.
■ Using the backlight
Press BACKLIGHT on the left side of the remote control.
The backlight shuts off after a few seconds to save power.
Note
• In the settings, you can choose to activate the backlight automati-
cally when you turn on the remote control (see page __).
■ Activating modes
The remote control has different modes.
When controlling components, the remote control should be set to
Use mode. If a label (like
or ) appears at the center top
of the touch screen, see page __ for information or switching your
remote control to the Use mode.
■ Using touch screen buttons
1. Sending commands
By tapping the touch screen buttons you send commands to the
components you have selected. When you send a command, the
remote control icon indicates that it is transmitting signals
. The
name of the active components is indicated on the device tab.
2. Scrolling
Most components have more than one control panel. You can scroll
through these control panels using
and . The panel number
on the left (or right) bottom of the screen indicates the active panel
number and the total number of panels, for example
.
By holding down a scroll button, you cycle repeatedly through all
the control panels of a component.
■ Using the left/right buttons
The left/right buttons change function depending on the component
the remote control is operating. The current function is displayed on
the touch screen right above the button. The function can be an IR
command which is transmitted, or a jump to a specific component
page.
■ Using the direct-access buttons
You can operate this unit with the direct-access buttons (POWER,
STANDBY, MUTE and VOL +/–) at any time, even without turning
on the touch screen.
Tap the screen gently.
The Home menu appears.