Yamaha pmn User Manual
Page 77
E-
71
AD
V
ANCED
OPERA
TION
English
■ Switching to another component without
affecting the active component
If you switch to another component (for which you already defined
a component action), RC codes are sent out the moment you select
the component.
To switch to another component without sending RC codes, follow
this procedure.
Example
You defined a device action for the VCR1: when you select the
VCR1, the D-TV switches to channel 10. Now you wish to keep
watching channel 2 on the D-TV when you switch to the VCR1 to
rewind a tape.
1
1
Open the Device menu.
2
2
Press and hold the left or right button (labeled “NO
IR”).
The remote control icon turns around
, indicating that the
component you are going to select will not send IR codes so as
not to affect the active component.
REMOTE CONTROL FEATURES
3
3
Tap the component you want to select.
The control panel of the new selected component appears and
the remote control icon returns to its original position. You can
now operate the new selected component without affecting the
previously active component.
The remote control
icon turns around.
The control panel of the new selected components appears.