Yamaha pmn - Manual (Page 93)

E-
87
AD
V
ANCED
OPERA
TION
English
REMOTE CONTROL FEATURES
Setting timers
With a timer you can activate a component at the time you determine.
■ Setting timers
To activate a component at a desired time, you can use the timer.
1 1 Tap .
2 2 Open the Macro menu and select a timer group.
3 3 Switch to the Edit mode via at the bottom of the
touch screen.
Empty timer buttons appear in the TIMER control panel.
4 4 Tap the button for which you want to set a timer.
The first TIMER control panel appears, enabling you to set the
start time.
5 5 Enter the command the timer should execute and tap
.
A timer can contain either a single IR command or a macro.
You can navigate to any control panel you want, just as you do
in the Use mode.
6 6 Tap the clock button and set the start time using the
left/right buttons.
7 7 Tap one or more day buttons to select or deselect
days for the timer.
You can choose to repeat the timer weekly.
8 8 Scroll down to display the second TIMER control
panel, in which you can set the stop time.
9 9 Enter the command the timer should execute and tap
.
10 10 Set the stop time and select the days following the
same procedure described in steps 6 and 7.
11 11 Tap the clock button to deselect it and press the left
button (labeled “CLOSE”) to close the timer.
A confirmation screen appears, enabling you to save or cancel
the timer.
12 12 Tap .
The timer is activated.
Note
• The timer works only when the remote control’s sending eye is
pointed at the controlled component and no obstructions interfere
with the IR signal.
■ Editing timers
You can edit any timer you have set.
1 1 Open the timer group that contains the timer.
2 2 Switch to the Edit mode via at the bottom of the
touch screen.
3 3 Tap the timer you want to edit.
The contents of the timer appear.
4 4 Edit the timer.
5 5 Press the left button to close the timer.
A confirmation screen appears, enabling you save or cancel the
timer.
6 6 Tap .
The timer is edited.
■ Organizing timers into groups
You can create as many timer groups as you like. Each group can
contain up to 25 timers.
1 1 Open any timer group.
2 2 Switch to the Add mode via at the bottom of the
touch screen.
You can create a new group, copy an existing group, or restore
a previously-deleted group.
• : You add a new group in which you can
record new macros.
• : You copy a group and its macros and use
the copy to create new macros.
• : You restore a deleted group and reuse the
macros.
3 3 Tap .
You see a touch screen on which you can create and edit timer
groups. The new group is added to the Macro menu.