Yamaha pmn - Manual (Page 48)

E-
42
REMOTE CONTROL OPERATIONS
Operating this unit
The remote control provides you with 8 pages of intuitive control panels for operating the RX-Z1. First go to the RECEIVER control panels
by tapping
on the Home menu.
■ Item tabs
Tap an item tab to select the item you want to operate.
1 2
1
4
2
3
5
1 INPUT
You can select a source component (see page __).
2 DSP
You can select a DSP sound field program (see page __).
The
controls can be used to select one of three DSP
control panels.
3 OPTION
By default there are buttons to select main speaker A/B, zone 2, etc.,
appear.
4 SET MENU
You can adjust the items on the SET MENU (see page __ ).
5 PARAMETER
You can change the parameter settings of each DSP program (see
page __).
■ Left/right buttons
While any of the RECEIVER control panel appears on the touch screen, you can use the left/right buttons for the following operations.
1 Selecting the OSD mode
You can select the OSD mode with the left button (labeled “OSD”).
2 Turning DSP on and off
You can turn the DSP effect on and off directly with the right button
(labeled “STEREO”).