3 hp tone ctrl (headphone tone control), 4 center geq (center graphic equalizer), 5 rear ct geq (rear center graphic equalizer) – Yamaha pmn User Manual
Page 67: 3 hp tone ctrl, 4 center geq, 5 rear ct geq
E-
61
AD
V
ANCED
OPERA
TION
English
SET MENU ITEMS
3 HP TONE CTRL (headphone tone control)
Use this feature to adjust the level of the bass and treble when you use your headphones.
Control range (dB): –6 – +3 for both BASS and TRBL (treble)
Initial setting:
0 dB for both BASS and TRBL (treble)
1
1
Select “BASS” or “TRBL”.
2
2
Tap or to change each level.
4 CENTER GEQ (center graphic equalizer)
Use this feature to adjust the built-in 5-band graphic equalizer so that the center speaker tonal quality matches that of the left and right main
speakers.
Control range (dB): –6 – +6
Initial setting:
0 dB for 5-band
1
1
Tap
to select a higher frequency and tap
to select a lower
frequency.
You can select the 100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies.
2
2
Tap or to adjust the level of that frequency.
Note
• You can monitor the center speaker sound while adjusting this item by using the test
tone. Tap
on the PARAMETER control panel before starting the foregoing
procedure. “TEST DOLBY SUR.” (or “TEST DSP”) appears on the video monitor, and
the test tone starts alternating among the speakers. Once you begin this procedure, the
test tone remains at the center speaker and you can hear how the sound changes as you
adjust the various frequency levels. To stop the test tone, tap
(see pages __ and
__).
5 REAR CT GEQ (rear center graphic equalizer)
Use this feature to adjust the built-in 5-band graphic equalizer so the rear center speaker tone matches that of the left and right rear speakers.
Control range (dB): –6 – +6
Initial setting:
0 dB for 5-band
1
1
Tap
to select a higher frequency and Tap
to select a lower
frequency.
You can select the 100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies.
2
2
Tap or to adjust the level of that frequency.
Note
• You can monitor the center speaker sound while adjusting this item by using the test
tone. Tap
on the PARAMETER control panel before starting the foregoing
procedure. “TEST DOLBY SUR.” (or “TEST DSP”) appears on the video monitor, and
the test tone starts alternating among the speakers. Once you begin this procedure, the
test tone remains at the rear center speaker and you can hear how the sound changes as
you adjust the various frequency levels. To stop the test tone, tap
(see pages __
and __).
3 HP TONE CTRL
≥ BASS
|
TRBL
|
-
+
0dB
4 CENTER GEQ
≥ 100Hz
|
300Hz
|
1kHz
|
3kHz
|
10kHz
|
-
+
0dB
5 REAR CT GEQ
≥ 100Hz
|
300Hz
|
1kHz
|
3kHz
|
10kHz
|
-
+
0dB