Yamaha pmn - Manual (Page 14)

E-
8
CONTROLS AND FUNCTIONS
Remote control
1 Sending eye
Outputs infrared (IR) remote control signals. Aim this at the
component you want to operate.
2 CONTRAST +/–
Adjust the contrast of the display.
3 BACKLIGHT
Turns the backlight on.
4 Direct-access buttons
• POWER: Turns on the power of this unit.
• STANDBY: Sets this unit in the standby mode.
• MUTE: Mutes the sound. While the mute function is on,
“MUTE ON” appears on the front panel display.
• VOL +/–: Increases or decreases the volume level.
5 Touch screen
6 Left/right buttons
Depending on the components the remote control is operating, these
buttons change function. The current function is displayed on the
touch screen right above the button.
7 Learning eye
Receives RC codes from existing remote controls.
8 I/O (Serial port)
See page __ for information.
9 Battery door
0 RESET
See page __ for information.
4 2
3
1
5
6
7
9
0
8
1
8
7
6 5
4
2
3
1
Home
To go to the Home menu.
2
Remote control icon
Touch and hold to enter Setup.
3
Device menu
To open control panel of components.
4
Panel number
Shows active control panel.
5
Mode menu
To customize the remote control.
6
Control panel
To send commands to components.
7
Scroll buttons
To display previous/next control panel.
8
Macro menu
To open stored list of commands.
■ Display on the touch screen