Xerox -05W - Manual (Page 135)

8-3
File Transfer
Sending Files
The following procedure is used to transfer files from your PC to the host.
1. Start the transfer procedure on the host computer and specify that
files are to be received.
2. Display the TeemTalk File menu on your PC and select File
Transfer... to display the Initiate File Transfer dialog box.
3. Select the transfer protocol you wish to use in the Transfer
Protocol list box.
4. If you want to change the default parameter settings for the
chosen transfer protocol, click the relevant Parameters button
and make your selections in the displayed dialog box then click
OK. See the section entitled Setting Protocol Parameters later in
this chapter for details.
Note: If the file transfer fails it is probably because of differences
between the local and remote parity and the word size.
5. Select Send in the How box.
6. Click the Start button to display the Send File dialog box.