Printing, Use windows default printer, Default teemtalk printer – Xerox -05W User Manual
Page 203: Print manager, Printing -27, Use print manager
11-27
Initialization Commands
Printing
Default TeemTalk Printer
Initialization File: device=printer details
Command Line:
Not applicable
Default Setting:
As specified in the Control panel
This command enables you to specify a different printer which TeemTalk will use by
default instead of that specified in the Control panel.
Use Windows Default Printer
Initialization File: UseWindowsPrinter=yes
Command Line:
-wp
Default Setting:
TeemTalk default printer used.
These commands will cause TeemTalk to use the Windows default printer by default,
instead of its own default printer.
Use Print Manager
Initialization File: UsePrintManager=0/1
Command Line:
Not applicable
Default Setting:
0
This command enables you to specify that data is sent to the print manager instead of
directly to the port when in Auto Print or Printer Controller mode.
To specify that data is to be sent to the print manager, you would enter the following:
UsePrintManager=1
Data will be spooled to the printer but will not be printed until either Auto Print
mode is disabled or the Eject Page option in the File menu is selected.
To specify that data is to be sent directly to the port instead of the print manager, you
would enter the following:
UsePrintManager=0