Xerox -05W - Manual (Page 99)

7-25
Setup Menus
Emulation Settings
This dialog box is displayed by selecting Emulation in the Settings menu.
Emulation
Factory default: VT100
The setting of this option determines the current terminal emulation mode.
VT52 and VT100 modes enable you to run applications written for the DEC VT52
and VT100 terminals, respectively.
Tek mode provides compatibility with software designed to drive the Tektronix 4100
or 4200 series terminals. Emulation of the Tektronix 4014 terminal can be achieved
by selecting this option and setting the Dialog Area Enabled option in the Dialog
Settings dialog box to 0.
Edit mode provides compatibility with software designed to drive the DEC VT100
terminal. In this mode the following features are set to pre-determined conditions:
A. The dialog area is enabled and visible.
B. The dialog area buffer and scrolling region are set to 24 lines.
C. Cursor origin mode is set to Absolute (refer to the description of
the Cursor Origin option in the Dialog Settings dialog box).
D. Insert/Replace character mode is set to Replace.
E. Keys PF1 through PF4 generate ANSI cursor movement
sequences.
F. All programmed strings for keys are temporarily disabled.