Xerox -05W - Manual (Page 187)

11-11
Initialization Commands
Disable 'Closed Connection' Message Box
Initialization File: exitOnClose=on TeemTalk exits immediately
exitOnClose=off TeemTalk does not exit
exitOnClose=connect TeemTalk attempts to
reconnect
Command Line: -e TeemTalk exits immediately
-e1 TeemTalk does not exit
-e2 TeemTalk attempts to reconnect
Default Setting: Message box displayed
When the host closes the connection or the connection fails, TeemTalk normally
displays a message box giving you the option to reconnect, cancel or exit. These
commands will disable the message box and cause TeemTalk to immediately perform
the required option.
Disable New Session Warning Message Box
Initialization File: sessionWarning=off
Command Line:
-os
Default Setting: Enabled
A warning message is displayed by default when you attempt to open a new session
while a session is currently open. These commands enable you to disable the
message box so that TeemTalk automatically closes the current session and opens the
new session.
Disable 'Exit TeemTalk' Message Box
Initialization File: warnExit=off
Command Line:
-j
Default Setting: Enabled
A message box will be displayed if you attempt to exit TeemTalk while a network
session is still active. These commands will disable the message box so that TeemTalk
automatically closes the network connection when it is exited.