Xerox C3000 - Manual (Page 137)

Setting an E-mail Destination as a BCC
127
2
Setting an E-mail Destination as a BCC
E-mail is sent to all specified destinations as bcc.
A
Place the original, and then select the scan settings you require.
B
Press [TX Mode].
C
Press [BCC Transmission] to highlight it.
D
Press [OK].
The standby display appears.
To check the settings, press [TX Mode].
E
Specify a destination, and then press the {Start} key.
Note
❒ You can program one of the Quick Operation keys with operations for this
function. Using the Quick Operation key allows you to omit step B .
Reference
“Facsimile Features”, General Settings Guide