Xerox C3000 - Manual (Page 150)

Other Transmission Features
140
2
Closed Network
If you turn this function on, transmission will only take place if the destination's
Closed Network Code is the same as yours. This function can stop you acciden-
tally sending information to the wrong place.
Important
❒ You need to register a Closed Network Code beforehand.
❒ This function is not available with Internet Fax.
A
Place the original, and then select the scan settings you require.
B
Press [TX Mode].
C
Select [Option Setting].
D
Press [Closed Network] to highlight it.
To cancel a Closed Network transmission, press [Closed Network] again.
E
Press [OK] twice.
F
Specify the destination, and then press the {Start} key.
Note
❒ You can program one of the Quick Operation keys with operations for this
function. Using the Quick Operation key allows you to omit step B and step C .
Reference
“Facsimile Features”, General Settings Guide