Xerox C3000 - Manual (Page 151)

Transmission Options
141
2
SUB Code Transmission
Enable this function to perform SUB Code Transmission.
Important
❒ This function is not available with Internet Fax.
❒ To perform SUB Code Transmission, a SUB Code must be set in [Adv.Features],
the Address Book, or Keystroke Programs in advance. Even though “SUB
Code Transmission” is set to on, if the SUB Code is not appended to the spec-
ified destination, transmission is in standard fax mode.
❒ When you select a destination that has a registered SUB Code from the Ad-
dress Book, if “SUB Code Transmission” is set to off, the SUB Code is not ap-
pended and transmission is in standard fax mode.
A
Place the original, and then select the scan settings you require.
B
Press [TX Mode].
C
Select [Option Setting].
D
Press [SUB Code Transmission] to highlight it.
To cancel a SUB Code Transmission, press [SUB Code Transmission] again.
E
Press [OK] twice.
F
Specify the destination, and then press the {Start} key.