Xerox C3000 - Manual (Page 148)

Other Transmission Features
138
2
Label Insertion
With this function you can have the receiver's name printed on the document
that is received at the other end.
Important
❒ To use this function, set Label Insertion to [On] when registering fax destina-
tions in the Address Book, and also set “Label Insertion” to on when sending
fax documents.
❒ When there is an image around the area where the Label is to be printed, that
image is deleted.
The receiver's name is printed as follows:
• Receiver's name: printed at the top of the page and preceded by “To:”.
• Standard message: the programmed message is printed within the next two
lines.
Set this function as follows:
• Set Label Insertion to [On] when programming fax destinations.
• Set Label Insertion to on when sending fax documents.
• On the Standard Message screen, select the standard message you want to
print.
A
Place the original, and then select the scan settings you require.
B
Press [TX Mode].
C
Select [Option Setting].