Zebra Technologies ZebraNet ZM400TM - Manual (Page 36)

Getting Started
Before You Begin 36
14197L-001 Rev. A ZebraNet
®
10/100 Internal Print Server for ZM400 and ZM600 User Guide 04/19/2007
4. Press Setup/Exit to exit the Setup Mode.
5. From the network configuration label, you need to look for these numbers:
• IP PROTOCOL
• IP ADDRESS
• SUBNET MASK
• DEFAULT GATEWAY
• MAC ADDRESS
6. On the network configuration label that prints out for your 10/100 Internal PS device,
circle the aforementioned settings. You can now proceed to
Assigning an IP Address
on page 41 .