Webview – Zebra Technologies ZebraNet ZM400TM User Manual

Page 39

Advertising
background image

39

Getting Started

Defaulting the 10/100 Internal PS

04/19/2007

ZebraNet

®

10/100 Internal Print Server for ZM400 and ZM600 User Guide

14197L-001 Rev. A

WebView

To default the 10/100 Internal PS to factory settings using WebView, complete
these steps:

1.

From the ZebraNet PrintServer view, click

Factory Print Server Settings

.

The Restore to Factory Defaults page opens:

Figure 10 • Restore to Factory Defaults

2.

Enable the check box for the settings you want to reset, and click

Submit Changes

.

Important •

During the reset cycle, the web pages are unavailable. Upon completion,

check the IP address of the 10/100 Internal PS as it may have changed during the reset
cycle.

Advertising
This manual is related to the following products: