Zebra Technologies ZebraNet ZM400TM User Manual
Page 42
Getting Started
Assigning an IP Address
42
14197L-001 Rev. A
ZebraNet
®
10/100 Internal Print Server for ZM400 and ZM600 User Guide
04/19/2007
Assigning an IP Address with DHCP
To assign an IP address using ZebraNet View, complete these steps:
1.
From the task bar, select
Start > Programs > ZebraNet Utilities > ZebraNet View
.
The ZebraNet View dialog opens:
Figure 13 • ZebraNet View
2.
Compare the MAC Address on the 10/100 Internal PS network configuration label with
the H/W Address column on the screen to find the 10/100 Internal PS you are working
with.
3.
When you locate your 10/100 Internal PS, select it.
4.
From the menu bar, select
PrintServer > Configuration
.
5.
If your 10/100 Internal PS does not have an IP address, complete these steps:
•
Find your 10/100 Internal PS and right-click.
•
In the small dialog that opens, enter an IP Address, click
OK
.
•
The ZebraNet View dialog opens.
Important •
On the illustration that follows, take note of the
H/W address
column and
Serial #
column. Compare what you see in ZebraNet View with the network
configuration label you printed out.
Important •
If the 10/100 Internal PS does not have an IP address, it shows in the main
screen with an IP of 0.0.0.0. If, after 2 minutes, you do not assign an IP Address, the
10/100 Internal PS defaults to IP Address 192.168.254.254.