Yamaha RX-V2400 - Manual (Page 59)

55
English
SET MENU
A
D
V
ANCED
OPERA
T
ION
■ Input rename INPUT RENAME
Use this feature to change the name of the inputs on the
OSD and front panel display.
MANUAL SETUP > INPUT MENU >
INPUT RENAME >
1
Press an input selector button to select the
input you want to change the name of.
2
Press –/+ to place the _ (under-bar) under the
space or the character you want to edit.
3
Press k / n to select the character you want to
use and –/+ to move to the next one.
• You can use up to 8 characters for each input.
• Press n to change the character in the following
order, or press k to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, #, *,
+, etc.
• Repeat steps 1 to 3 to rename each input.
4
Press + repeatedly to exit from INPUT
RENAME.
■ External input EXT.INPUT
Use this feature to set the direction of the signals input
into the center, subwoofer and surround channels when the
source component is connected to the MULTI CH INPUT
jacks. If you are inputting 8-channel signals from an
external decoder, use this feature to select jacks for the
additional front signals.
MANUAL SETUP > INPUT MENU >
EXT.INPUT >
6ch/8ch
This setting is used to select the number of channels input
from an external decoder.
Choices:
6ch , 8ch
FRONT
If you selected 8ch, you can select analog audio jacks to
which front signals from an external decoder will be input.
Choices:
DVD , DTV, CBL/SAT, VCR 1, DVR/VCR 2,
MD/TAPE, CD-R, CD, V-AUX
CENTER
Use to select where the signals input to the CENTER jack
will be output.
Choices:
CENTER , FRONT
• Select CENTER to output the signals from the center
speaker.
• Select FRONT to output the signals from the front left
and right speakers.
SWFR
Use to select where the signals input to the SUBWOOFER
jack will be output.
Choices:
SWFR , FRONT
• Select SWFR to output the signals from the subwoofer.
• Select FRONT to output the signals from the front left
and right speakers.
SL/SR
Use to select where the signals input to the SURROUND
jacks will be output.
Choices:
SL/SR , FRONT
• Select SL/SR to output the signals from the surround
speakers.
• Select FRONT to output the signals from the front left
and right speakers.
-/+ : Position p
p / : Character
CD -> CD
C)INPUT RENAME
. [6CH 8CH
(FRNT/SB-> FRNT)
CENTER ->CENTER
SWFR -> SWFR
SL/SR -> SL/SR
( --- -> SB )
-/+ Select
/ : Up/Down
D)EXT.INPUT
p p
00_RX-V2400U_EN.book Page 55 Friday, October 10, 2003 10:54 AM