Yamaha RX-V2400 - Manual (Page 83)

79
English
SOUND FIELD PARAMETER DESCRIPTIONS
ADDITIONAL
INFO
RMA
T
IO
N
■ REV.TIME (Reverberation time)
Function: This parameter adjusts the amount of time it takes for the dense, subsequent reverberation sound to
decay by 60 dB (at 1 kHz). This changes the apparent size of the acoustic environment over an
extremely wide range.
Description: Set a longer reverberation time for “dead” sources and listening room environments, and a shorter time
for “live” sources and listening room environments.
Control Range: 1.0 – 5.0 sec
■ REV.DELAY (Reverberation delay)
Function: This parameter adjusts the time difference between the beginning of the direct sound and the beginning
of the reverberation sound.
Description: The larger the value, the later the reverberation sound begins. A later reverberation sound makes you
feel like you are in a larger acoustic environment.
Control Range: 0 – 250 msec
■ REV. LEVEL (Reverberation level)
Function: This parameter adjusts the volume of the reverberation sound.
Description: The larger the value, the stronger the reverberation becomes.
Control Range: 0 – 100 %
Reverberation Reverberation
60 dB 60 dB 60 dB
Source Sound
REV.TIME REV.TIME REV.TIME
Early Reflections
Sound Source Short
Reverberation Long
Reverberation
Small value = 1.0 s Large value = 5.0 s
(dB)
60 dB
L
eve
l
Source Sound
Reverberation
REV.TIME REV.DELAY
Time
Source Sound
Le
v
el
REV. LEVEL
Time
00_RX-V2400U_EN.book Page 79 Friday, October 10, 2003 10:54 AM