Using the macro feature, English – Yamaha RX-V2400 User Manual
Page 67
63
English
REMOTE CONTROL FEATURES
A
D
V
ANCED
OPERA
T
ION
The Macro feature makes it possible to perform a series of operations by pressing just one button. For example, when you
want to play a CD, normally you would turn on the components, select the CD input, and press the play button to start
playback. The Macro feature lets you perform all those operations by simply pressing the CD macro button. The buttons
listed as macro buttons below are factory set with macro programs. You can also program your own macros (see
page 64).
*1
You can turn on some components (including YAMAHA components) connected to this unit by connecting them to the AC
OUTLET(S) on the rear panel. (Power control may not be synchronized with this unit depending on the component. For details,
please refer to the operation instruction for the connected component.)
*2
Playback can be started with any YAMAHA remote control-compatible MD recorder, CD player, CD recorder, DVD player, or LD
player. When using macros to operate other components, you will need to program the PLAY button on the control area of that
component (see pages 61 and 62) or to set up a manufacturer code (see page 60).
*3
When TUNER is selected as the input source, this unit receives the last station received before the unit was set to the standby mode.
Using the macro feature
CD
SYSTEM
POWER
CD
(CD area)
PLAY
Press a macro button
To automatically transmit these signals in order
Macro buttons
First
Second
Third
(*1)
—
—
—
(MD/TAPE area) (*2)
(CD-R area) (*2)
(CD area) (*2)
—
—
(VCR 1 area) (*2)
(DVR/VCR2 area) (*2)
(DVD area) (*2)
—
—
—
—
—
—
—
PHONO
SYSTEM
POWER
PHONO
V-AUX
V-AUX
TUNER
TUNER
(*3)
MD/TAPE
MD/TAPE
PLAY
CD-R
CD-R
PLAY
CD
CD
PLAY
DTV
DTV
CBL/SAT
CBL/SAT
VCR 1
VCR 1
PLAY
DVR/VCR2
DVR/VCR2
PLAY
DVD
DVD
PLAY
SYSTEM
POWER
TV
POWER
TV
POWER
TV
POWER
MULTI CH IN
MULTI CH IN
STANDBY
STANDBY
00_RX-V2400U_EN.book Page 63 Friday, October 10, 2003 10:54 AM