Zebra Technologies P310F - Manual (Page 14)

6
980261-001 Rev. B
LOADING
RIBBONS
The P310 Printer requires approved ribbons
(See Appendix C). The Resin Thermal Transfer and
Dye Sublimation ribbons for P310C only and
monochrome ribbons for P310F only are specifically
designed for your P310 Printer. For optimum per-
formance and printer life (Print Head), always use
approved ribbons.
DO NOT TOUCH the print head or the electronic
components on the print head carriage. Discharges
of electrostatic energy that accumulates on the sur-
face of the human body or other surfaces can
damage the print head and other electronic
components used in the device.
1. Remove ribbon from packaging.
2. Open cover and press down on the print
head unlock lever to open the print head
carriage. The print head carriage will pop
open.
Continued on next page .......