Zebra Technologies P310F - Manual (Page 27)

19
980261-001 Rev. B
1. Turn power OFF. Raise Print Head
and remove the Ribbon.
CLEANING THE
PRINT HEAD
2. Clean Print Head by moving alcohol-
moistened swab tip side-to-side across
Print Head elements. Only use moderate
force. (To reorder swabs see Appendix
C).
Never use a sharp object to scrape deposites from
the print head. Permanent damage will result.
A cleaning using the Cleaning Cards usually suffices.
However, a seperate Print Head cleaning using
swabs can remove more stubborn deposites when
print anomalies persist. To avoid deposits, only use
foam-tipped swabs.
3. Turn power ON. Allow two minutes
for the print head components to dry
before resume printing.