Zebra Technologies P310F - Manual (Page 26)

18
980261-001 Rev. B
Your P310 Printer includes a simple cleaning system
using the Pre-saturated Cleaning Cards provided.
The regular use of these cards will clean and
maintain important parts of your printer: including
the Print Head, Transport Rollers, and Magnetic
Encoder Station (optional feature).
CLEANING
SYSTEM
WHEN TO CLEAN
When the amber & red indicators flash
(Every 1000 cards* approx.)
*Using 5-panel color ribbon (YMCKO).
(Every 5000 cards* approx.)
*Using monochrome ribbon.
*Optional factory setting.
HOW TO CLEAN
1. Leave power on.
Open Cover and release Print Head Bracket to
remove ribbon.
Close Print Head.
Close Cover. Remove cards from Card Cartridge
2. Insert one Pre-saturated Cleaning Card (provided)
through slot on the side of the Card Cartridge.
3. Press the Panel Button for a few seconds.
The Card will feed into printer and carry out the
cleaning process. Repeat the process with a new
Cleaning Card if necessary.
Although the amber and red indicators will keep
flashing until the cleaning process has been
performed, the printer will continue to operate.
Note: For cleaning prior to the WHEN TO CLEAN signal, press the Panel Button for 3
seconds to start the cleaning process (Repeat first steps 1 & 2 above).