Zebra Technologies P310F - Manual (Page 39)

31
980261-001 Rev. B
APPENDIX A - MAGNETIC CARD
STRIPE ENCODER
Operation and maintenance requirements for the P310 Printer with the optional
magnetic card stripe encoder.
(See Chapter 2 for location).
The magnetic encoder can be set for either high or low coercivity.
The magnetic encoder is a factory installed item with the
read/write head positioned below the card path, available
with HICO encodingor LOCO encoding.
When loading cards into the Card Cartridge, please ensure
the magnetic stripe is facing towards the printer and closest
to the rear.
Also available are Printer models with the Magnetic Read/
Write head positioned above the card path, with HICO
encoding or LOCO encoding.
When loading cards, please ensure the magnetic stripe.
ONLY USE cards that comply with ISO 7810 &
7811 standards for magnetic stripe cards. The
magnetic stripe must be flush to the surface of the
card to work properly. Never use taped-on
magnetic stripes.
Approved HICO & LICO PVC cards are available. (See Appendix C.)
SAMPLE ENCODING PROGRAM
Refer to Programmer's manual (Part number 980081-001)
STRIPE
DOWN
STRIPE
UP