Zebra Technologies P310F - Manual (Page 29)

21
980261-001 Rev. B
* See Appendix C for replacement Cleaning Rollers.
SLOT
Although the amber and red indicators will keep
flashing until maintenance has been performed,
the printer will continue to operate.
6. To replace Cartridge into printer:
Make sure the arrow on top of the assembly is
facing toward the rear of the printer.
Hook assembly into slot on printer and rotate
down. Ensure the assembly locks in place.
DO NOT touch the roller surface that contacts
the card.
7. Close Cover.
3. Remove Cleaning Roller from Cartridge and
discard.
4. Install new Cleaning Roller into Cartridge*. To
avoid contamination, always hold the Cleaning
Roller assembly by the ends.
5. Carefully peel off wrapper from new Cleaning
Roller while in Cartridge.