Zebra Technologies P310F - Manual (Page 19)

HOOK
11 980261-001 Rev. B
FEEDING ONE
CARD AT A TIME
A Manual Feed Slot is available on the size of the
Card Input Hopper for feeding single cards.
Cleaning Cards are fed manually through this slot.
The Card Cartridge must be empty for manual card
feeding to work properly.
For one-at-a-time printing, feed cards
through slots on side of Hopper.
Do not feed more than one card at a time.
REMOVING
CARD
CARTRIDGE
Remove the Card Cartridge prior to packaging the
printer for shipment.
To remove, pull hook back, and lift
hopper out.