Zebra Technologies MtP400 - Manual (Page 31)

Printer Configuration
Pairing Mode Pairing Mode
Paired
Possible Values: Paired*, Unpaired
This feature allows Bluetooth pairing to occur between the printer and the connecting device whenever Security
is required by either device. Pairing requires that the PIN on the printer and the connecting exactly match each
other.
PIN PIN
0
Possible Values: 0*, Up to 16 Numeric Characters.
Note that this feature is only available if Paring Mode is set to Paired.
To advance through the character positions, press the Advance Button. To change the character at the current
position, press the Increment Button. The characters that may be selected are “0123456789” and SPACE.
Setting a character to SPACE will terminate the value being set.
Security Security
Off
Possible Values: Off*, On
Setting Security to On forces the printer and the remote device to use pairing. Setting Security On requires that
Pairing is set to Paired and that a PIN has been entered that matches the PIN in the remote device.
Local Name Local Name
MtP400
Possible Values: MtP400*,
Up to 16 characters of “0” through “9”, “A” through “Z”, “a” through “z”, “-“, “_”, SPACE
This feature sets the name that will be displayed by most host systems when “discovering” the printer. When
shipped from the factory, the default value for the Bluetooth Local Name is “MtP400-xxxx” where “xxxx” is
the last four digits of the Bluetooth interface’s hardware Address. This name may be changed to any
combination of letters, numbers, dashes, underscores, and SPACEs. The name may be up to 16 characters in
length.
To advance through the character positions of the name, press the Advance Button. To change the character
at the current position, press the Increment Button. The order of characters that may be selected is
“0123456789 ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz - _ SPACE”.
25