Zebra Technologies MtP400 - Manual (Page 49)

Advanced Setup Features
An additional security menu is available for system administrators who prefer to “lock out” operator changes to
the various menus. This method of security can be set independently for the Format Menu, the Interface Menu,
or the Options Menu.
When set to Edit Allowed, the user is allowed to make changes to any item in the menu specified. When
set to View, the operator can review the settings, but cannot edit, or change, the values. When set to
Initialize
, the printer will reset all values in that menu and any associated submenus to the factory default
values and security will be reset to Edit Allowed.
To be able to access the Security Menu, you must press and hold the Increment Button rather than use the
normal “hold the Enter Button during power on” method. Once Setup is entered, press the Advance Button
to cycle through the menus until “Security Menu” is displayed. You may then press the Enter Button to
advance through the items as listed below.
SECURITY MENU
Format Menu Format Menu
Edit Allowed
Possible Values: Edit Allowed*, View Only, Initialize
This feature selects whether the items in the Format Menu can be edited, or only viewed by the operator.
Initialize
will reset all the features for all formats to factory default values.
Interface Menu Interface Menu
Edit Allowed
Possible Values: Edit Allowed*, View Only, Initialize
This feature selects whether the items in the Interface Menu can be edited, or only viewed by the operator.
Initialize
will reset all the features for all interfaces to factory default values, including the optional
Bluetooth and Wi-Fi interfaces.
Options Menu Options Menu
Edit Allowed
Possible Values: Edit Allowed*, View Only, Initialize
This feature selects whether the items in the Options Menu can be edited, or only viewed by the operator.
Initialize
will reset all the options to factory default values.
43