Zebra Technologies MtP400 - Manual (Page 57)

Specifications
Media Specifications
Receipt Paper
General Specifications: 0.0022 to 0.0065” (0.056 to 0.089mm) Thick
Black Mark Sensing On Printed Side
(Black Mark Sensing On Back Side and Gap Sensing On MtP400 LP Models)
MtP400, MtP400 LP: 3 to 4.125” (76.2 to 104.78mm)Wide
(Roll Media) 0.750” (19.05mm) Inside Diameter Core
2.625” (66.68mm) Maximum Outside Diameter
MtP400 SL: 3 to 4” (76.2 to 101.6mm) Wide
(Preloaded Cassette) 6” Maximum Length
100 Sheets Maximum Per Cassette
Approved Vendors: Kansaki: P300, P310, P350, P354, P390*, P530UV, TO281CA,
OP200, TO381N, F180, F380, F550
Jujo: TF-50KS-E2C
Honshu: FH65BV-3
Appleton: Resiste 900-3.0*
*Standard Printek Offering
Labels
MtP400: 0.0022 to 0.0065” (0.056 to 0.089mm) Thick
0.750” Inside Diameter Core
Black Mark Sensing On Printed Side
2.625” Maximum Outside Diameter
4.125” Maximum Width (carrier)
MtP400 LP: 0.0022 to 0.0065” (0.056 to 0.089mm) Thick
0.750” Inside Diameter Core
Black Mark Sensing On Printed Side Or Back Side
Gap Sensing Between Labels
2.625” Maximum Outside Diameter
4.125” Maximum Width (carrier)
51