Yamaha RX-V3900 - Manual (Page 101)

97
En
Graphical user interface (GUI) menu
AD
V
ANCED
OPERA
T
ION
English
When “Zone2 Volume” or “Zone3 Volume” is set to “Fixed”,
you cannot select the following parameters:
– Zone2 Max Vol./Zone3 Max Vol.
– Zone2 Initial Vol./Zone3 Initial Vol.
Zone2 Max Vol./Zone3 Max Vol.
(Zone 2/Zone 3 Maximum volume setting)
Use this feature to set the maximum volume level in the
Zone 2 or Zone 3.
Control range: –30.0 dB to +15 .0 dB, +16.5 dB
Control step: 5.0 dB
The “Zone2 Max Vol.” or “Zone3 Max Vol.” setting takes
priority over the “Zone2 Initial Vol.” or “Zone3 Initial Vol.”
setting.
Zone2 Initial Vol./Zone3 Initial Vol.
(Zone 2/Zone 3 initial volume setting)
Use this feature to set the volume level of Zone 2 or Zone
3 when the power of each zone is turned on.
Control range: Off, Mute, –80.0 dB to +16.5 dB
Control step: 0.5 dB
The “Zone2 Max Vol.” or “Zone3 Max Vol.” setting takes
priority over the “Zone2 Initial Vol.” or “Zone3 Initial Vol.”
setting.
Zone2 Balance/Zone3 Balance
(Zone 2/Zone 3 balance)
Use this feature to adjust the balance of the volume of the
left and right channels in each zone.
Choices: L10 to L1, 0, R1 to R10
Zone2 Tone Control/Zone3 Tone Control
(Zone 2/Zone 3 tone control)
Use this feature to adjust the balance of bass and treble
output to the selected zone.
Choices: Bass (Bass control), Treble (Treble control)
Control range: –10.0 dB to +10.0 dB
Initial setting: 0.0 dB
Zone2 Muting Type/Zone3 Muting Type
(Zone 2/Zone 3 muting type)
Use this feature to adjust how much the mute function
reduces the output volume of the selected zone.
■ Zone OSD (Zone on-screen display)
Use this feature to display the operational status of Zone 2
and Zone 3 on the Zone 2 video monitor connected to the
ZONE VIDEO jacks on the rear panel of this unit.
■ Zone Rename (Zone Rename)
Main/Zone2/Zone3
(Main/ Zone 2/ Zone 3 rename)
Use this feature to edit the name of the selected zone.
1
Press 9 k / n / l / h to select a character or
function and then press 9
ENTER to
confirm the selection.
Repeat step 1 until you input a name you want to use.
2
Press 9 k / n / l / h to select “OK” and then
press 9
ENTER.
y
• To reset the name, select “RESET” and then press
9ENTER.
• To cancel the operation without change, select
“CANCEL” and then press 9ENTER.
This menu adjusts the optional system settings.
■ Memory Guard (Memory guard)
Use this feature to prevent accidental changes to sound
field program parameter values and other system settings.
y
When “Memory Guard” is set to “On”, “ ” appears on the left
side of the name of a parameter being protected.
Note
Note
Note
Choice Functions
Full Mutes all the audio output.
–20dB Reduces the current volume by 20 dB.
–40dB Reduces the current volume by 40 dB.
Choice Functions
Off Turns off the zone on-screen display feature.
Zone2 Displays the operational status of Zone 2 only.
All Displays the operational status of Zone 2 and
Zone 3.
Setup (Option)
Choice Functions
Off Turns off the “Memory Guard” feature.
On Protects the following parameters:
– sound field program parameters
– GUI menu parameters
– speaker levels settings