Yamaha RX-V3900 - Manual (Page 106)

102
En
Saving and recalling the system settings (System Memory)
■ Renaming the stored settings
1
Follow steps 1 to 4 in “Saving by the GUI
menu operation” (page 101).
2
Press 9k / n repeatedly to select “xxx
Rename” and then press 9h.
“xxx” indicates the zone you selected in step 1.
3
Press 9k / n repeatedly to select the desired
memory number and then press 9h.
4
Press 9k / n / l / h to select a character or
function and then press 9
ENTER to
confirm the selection.
Repeat step 4 until you input a name you want to use.
5
Press 9k / n / l / h to select “OK” and then
press 9
ENTER.
y
• To reset the name, select “RESET” and then press 9ENTER.
• To cancel the operation without change, select “CANCEL” and
then press 9ENTER.
6
Press I
MENU to turn off the GUI menu.
If you change the language setting (page 100 or 123), names of
the memory settings will be automatically reset.
■ Parameters to be saved
The parameter groups indicated in bold are selected by
default.
Main zone parameters
Zone 2 and Zone 3 parameters
Note
Group Parameters Page
Input/HDMI
Out Audio Select 85
Decoder Mode 85
Input source 36
HDMI OUT SEL 37
Audio Stereo/Surround 80
PURE DIRECT on/off 47
EXTD SUR. setting 75
Adaptive DRC 89
Adaptive DSP Level 89
LFE Level 90
Dynamic Range 90
Tone Control 92
Pure Direct 93
CINEMA DSP 3D mode on/off 46
Volume Volume level 36
SP Config Parametric EQ 90
Configuration 87
Distance 88
Level 89
Information (Auto Setup) 34
Setup Menu (Auto Setup) 30
Video/
Display Set Analog ` Analog 93
Analog ` HDMI 93
HDMI ` HDMI 94
Processing 94
Short Message 98
Playback Screen 98
Position 99
Wall Paper 99
Others Lipsync 92
Front Panel Display 98
Audio Output 95
Parameter Descriptions Page
Input Input source 120
Volume Volume level 120
Tone Control Tone control settings 120
Group Parameters Page