Yamaha RX-V3900 - Manual (Page 60)

56
En
XM® Satellite Radio tuning
y
• You can also select a preset number (1 to 8) by pressing
the numeric buttons (B).
• If you select a preset number being used (“*” appears next
to the preset number), the current preset channel will be
overwritten.
4
Press E
ENTER (or 9ENTER).
The preset channel is set and the PRESET indicator
disappears.
■ Clearing preset channels
You can clear the assignments of preset XM Satellite
Radio channels.
1
Select the preset XM Satellite Radio channel
to clear.
For details, see “Preset Search mode” (page 55).
2
Press and hold H
SEARCH MODE (or
I
SRCH MODE) until “CLEAR?” appears in
the front panel display.
3
Press E
ENTER (or 9ENTER) to clear the
preset channel.
To cancel the operation, press
HSEARCH MODE
(or ISRCH MODE).
Use this feature to display the XM Satellite Radio
information in the front panel display or in the GUI
screen.
y
• You can configure the display settings with “Display Set”
(page 98).
• You can hold or release the displayed information by pressing
9ENTER. While it is held, the HOLD indicator flashes in the
front panel.
• If a status message or an error message appears in the front
panel display or GUI screen, see “XM Satellite Radio”
(page 130).
• The current XM Satellite Radio reception level appears on the
top of the XM Satellite Radio information screen. For the best
reception, adjust the orientation of the antenna of Home Dock
so that “ ” or “ ” is displayed here. “ ” is displayed if
the antenna cannot receive the signals correctly. In this case,
adjust the orientation of the antenna (page 53).
■ Front panel display
Press K
INFO (or CINFO) repeatedly to toggle
between the following XM Satellite Radio
information display modes.
Before performing the following operations, set the operation
mode selector on the remote control to FAMP.
Displaying the XM Satellite Radio
information
Notes
CATEGORY INFO
Channel category, channel number, channel name
SONG INFO
Artist name, song title, channel number, channel name
ANTENNA INFO
Antenna reception level, channel number, channel name
DSP PROG. INFO
Sound field program
INPUT INFO
Input source, channel number, channel name