Yamaha NOT FOND DSP-Z11 - Manual (Page 16)

Quick start guide
16
En
1
Connect an HDMI cable to the HDMI output jack on
your Blu-ray Disc/HD DVD player and the BD/HD DVD
HDMI IN 1 jack of this unit.
2
Connect an HDMI cable to the HDMI OUT 1 jack on
this unit and the HDMI input jack on your video
monitor.
3
Connect the supplied power cable to AC IN on this
unit and then plug the power cable and other
components into the AC wall outlet.
y
This unit is equipped with AC OUTLET(S) that provide(s) power to
other components. See page 38 for details.
Step 2: Connect your Blu-ray Disc/HD
DVD player and other
components
AC IN
HDMI
OUT 1 BD/HD DVD IN1
Make sure that this unit and the Blu-ray Disc/HD
DVD player are unplugged from the AC wall
outlets.
BD/HD DVD HDMI IN 1
AC IN
HDMI OUT 1
HDMI output jack
HDMI cable
BD/HD DVD
HDMI IN 1 jack
Blu-ray Disc/HD DVD player
AV amplifier
HDMI input
jack
HDMI cable
HDMI OUT 1 jack
Video monitor
AV amplifier
General connection information
• General information on jacks and cable plugs
☞ P. 28
• General information on HDMI
☞ P. 28
• Speaker impedance setting
☞ P. 39
For further connections
• Using other kinds of speaker combinations ☞ P. 21
• Connecting a video monitor via various ways of connection
☞ P. 30
• Connecting a Blu-ray Disc/HD DVD player via various ways
of connection
☞ P. 31
• Connecting a DVD player via various ways of connection
☞ P. 32
• Connecting a DVD recorder or a digital video recorder
☞ P. 33
• Connecting a set-top box
☞ P. 32
• Connecting a CD player, an MD recorder, or a turntable
☞ P. 34
• Connecting an external amplifier
☞ P. 35
• Connecting a DVD player via multi-channel analog audio
connection
☞ P. 35
• Connecting a Yamaha iPod universal dock
☞ P. 36
• Using the REMOTE IN/OUT jacks
☞ P. 36
• Using the TRIGGER OUT jacks ☞ P. 36
• Using the VIDEO AUX jacks on the front panel ☞ P. 38
• Connecting this unit to your network
☞ P. 37
• Connecting a USB device
☞ P. 37
To the AC wall outlet