Yamaha NOT FOND DSP-Z11 - Manual (Page 70)

Using Network/USB features
70
En
Use this feature to access the desired music sources (WAV, MP3 and
WMA files on the connected PC, MCX-2000 or USB storage
devices and Internet Radio stations) directly. You can preset 8 items
in each sub input sources.
■ Assigning the items to the numeric button (1-8)
1
Press 3
NET/USB to select “NET/USB” as the input
source.
2
Select a desired music source you want to assign to
the numeric button (1-8) (B), and then play back the
source.
See page 67 for details.
3
Press 0
MEMORY.
This unit in the memory preset mode. The MEMORY indicator
flashes and following message appears in the video monitor
and front panel display.
y
When you do not complete each of the following steps within 10 seconds,
the memory preset mode is automatically canceled. In this case, start over
from step 3.
4
Press desired numeric buttons (1-8) (B).
The number of the selected numeric button appears in the video
monitor or front panel display.
5
Press 9
ENTER or 0MEMORY to confirm the
preset.
■ Select an item by using numeric buttons (1-8)
( B )
1
Press 3
NET/USB to select “NET/USB” as the input
source.
2
Select the desired sub input source.
3
Press one of the numeric button (1-8) (B) which the
desired item is assigned to select the item as the
input source.
The selected preset number appears in the front panel display,
and this unit starts the playback of the source assigned to the
selected numeric button.
• “Empty Memory!” appears in the front panel display and the short
message display when you press the numeric button (1-8) (B) to
which no items are assigned.
• This unit does not recall the correct item assigned to the selected
numeric button (1-8) (B) in the following cases:
– the connected USB device is incorrect.
– the PC or MCX-2000 which stores the selected item is turned off or
disconnected from the network.
– the selected Internet Radio station is temporary unavailable or out
of service.
– the directory of the selected item has been changed.
y
This unit stores the relative position of the preset items in a directory or
playlist, and does not recall the correct item by using numeric buttons
(1-8) (B) if you add or delete music files to or from the same directory
or playlist as the preset items. In such cases, preset the desired item to
the numeric buttons (1-8) (B) again.
We recommend the following methods:
PC server/MCX-2000
Create eight playlists which contain the desired items, and then preset
the top item of each playlist to the numeric buttons (1-8) (B). When
you change the items which are preset to the numeric buttons (1-8)
(B), replace the registered items in the playlist with the desired items
without deleting the playlist.
USB storage devices
Create eight directories which contain the desired items in a directory
beside the directory which contains all music files, and then preset the
top item of each directory to the numeric buttons (1-8) (B). When you
change the items which are preset to the numeric buttons (1-8) (B),
replace the items in the directory to the desired items without deleting
the directory.
Using shortcut buttons
Before performing the following operations, set the operation mode
selector on the remote control to FSOURCE.
MEMORY
TUNER MULTI CH PHONO CD CD-R DVD DTV DVR VCR MD
TAPE
BD
HD DVD
CBL
SAT
V-AUX
DOCK
NET
USB
- : P C / M C X
Flashes Preset number
MEMORY
TUNER MULTI CH PHONO CD CD-R DVD DTV DVR VCR MD
TAPE
BD
HD DVD
CBL
SAT
V-AUX
DOCK
NET
USB
1 : P C / M C X
Flashes Selected preset number
Before performing the following operations, set the operation mode
selector on the remote control to FSOURCE.
Notes
TUNER MULTI CH PHONO CD CD-R DVD DTV DVR VCR MD
TAPE
BD
HD DVD
CBL
SAT
V-AUX
DOCK
NET
USB
1 : P C / M C X
Selected preset number