Yamaha NOT FOND DSP-Z11 - Manual (Page 99)

Saving and recalling the system settings (System Memory)
99
En
Ad
v
a
nce
d
Op
eratio
n
You can recall the system settings for the selected zone only when the zone is
turned on.
4
Press 9k / n to select “Main Load” and then press
9
h.
The following menu appears in the video monitor.
y
If system settings are already stored in the selected memory number, the stored
system parameter settings appear in the menu screen. “Memory Empty” appears
in the menu screen if no system settings are stored in the selected memory
number.
5
Press 9k / n repeatedly to select the desired
memory number where the system settings are
stored and then press 9h.
Once “Load: ENTER” appears in the video monitor, press
9ENTER to confirm the loading.
y
You can cancel the loading by pressing 9 l.
6
Press I
MENU to exit from the GUI menu.
■ Example 1: Switching the settings of this unit
according to the using situations
Use the following example to change the settings of this unit
according to the using situations just by pressing the 7SYSTEM
MEMORY buttons.
SYSTEM MEMORY 1: Settings for enjoying movie
Save the following settings to enjoy movies. You can switch the
input source, sound field program, and the HDMI OUT jack
simultaneously.
Recommended parameter settings
Input source: BD/HD DVD (see page 50)
“HDMI OUT SEL” setting: OUT 2 (see page 51)
Sound field program: Sci-Fi (see page 54)
“Dimmer”: – 4 (see page 93)
Saved parameter groups
Input/HDMI Out, Audio, Option
SYSTEM MEMORY 2: Settings for enjoying TV programs
When you want to play back the audio signals input at the CBL/
SAT HDMI IN 3 jack on the speakers of the TV connected to the
HDMI OUT 1 jack to enjoy TV programs, use the following
settings. You can set input source and output component of the
audio signals simultaneously.
Recommended parameter settings
Input source: CBL/SAT (see page 50)
“HDMI OUT SEL” setting: OUT 1 (see page 51)
“Support Audio” setting: Other (see page 94)
Saved parameter groups
Input/HDMI Out, Audio
SYSTEM MEMORY 3: Settings for the book-reading time
When you enjoy reading books with listening to your favorite
Internet radio service, use the following settings. You can recall the
desired input source, Internet radio service, and audio settings
simultaneously.
Recommended parameter settings
Input source: NET/USB (Net Radio) (see page 50)
Sound field program: 11ch Enhancer (see page 54)
Volume level: Slightly low (see page 50)
y
Before saving the settings, select the desired Internet radio service (see page 69).
Saved parameter groups
Input/HDMI Out, Audio, Volume
Note
Memory1
Memory2
Memory3
Main Save
Input/HDMI Out
Audio
Volume
SP Config
Video
Option
Memory1
Memory2
Memory3
Main Save
Input/HDMI Out
Audio
Volume
SP Config
Video
Option
Save
Load: ENTER
Using examples
4 3
SYSTEM MEMORY
2 1
SYSTEM MEMORY 2
Settings for enjoying TV programs
SYSTEM MEMORY 4
Settings for enjoying games SYSTEM MEMORY 3
Settings for the book-reading time
SYSTEM MEMORY 1
Settings for enjoying movie