Yamaha NOT FOND DSP-Z11 - Manual (Page 81)

Graphical user interface (GUI) menu
81
En
Ad
v
a
nce
d
Op
eratio
n
■
Initialize (Program parameters initialization)
Use this feature to initialize the parameter of the selected sound field program.
Choices: No, Yes
• Select “Yes” and then press 9ENTER to set the program parameters to the factory default settings.
• Select “No” (or press 9l) to cancel the program parameter initialization.
y
Use “DSP PARAM” of “INITIALIZE” in “Advanced setup” to initialize the parameters of all sound field programs (see page 120).
Use this feature to reassign digital input/outputs, select the input
signal, rename the inputs, or adjust the level of the signal input at
each input source.
• Some parameters described above may not be available for all input sources and some
parameters are only available for specific input sources.
• You can set “Volume Trim” for each sub input source separately.
• The “Play Style” setting is effective to both “PC/MCX” and”USB”.
■ I/O Assignment
(Input/output assignment)
Use this feature to assign the input/output jacks according to the
component to be used if the initial settings of this unit do not
correspond to your needs. Change the following parameters to
reassign the respective jacks and effectively connect more
components.
Once the input/output jacks are reassigned, you can select the
corresponding component by using the DINPUT selector (or the
input selector buttons (3)).
Example 1: Assigning the CD DIGITAL INPUT COAXIAL
jack to “VCR”.
1
Select “Input Select” in the GUI menu and then select
“VCR”.
2
Select “I/O Assignment” and then “Coaxial Input”.
3
Select “5CD”.
Dimension
(“PLIIx Music” and “PLII Music”
only)
Pro Logic IIx Music and Pro Logic II Music dimension. Adjusts the sound field either towards the front or towards the rear.
Control range: –3 (towards the rear) to +3 (towards the front)
Initial setting: STD (standard)
Center Image
(“Neo:6 Music” only)
DTS Neo:6 Music center image. Adjusts the front left and right channel output relative to the center channel to make the
center channel more or less dominant as necessary.
Control range: 0.0 (center channel sound is output only from the front left and right speakers) to
1.0 (center channel sound output only from the center speaker)
Initial setting: 0.3
Decoder parameter Features
Rev. Level
Dialogue Lift
Initialize No
Yes
Input Select
Input source Sub input source Parameter
TUNER
—
Volume Trim
Rename
MULTI CH
—
Volume Trim
Rename
Multi CH Assign
BGV
PHONO
CD
CD-R
MD/TAPE
BD/HD DVD
DVD
DTV
CBL/SAT
DVR
VCR
—
I/O Assignment
Audio Select
Decoder Mode
Volume Trim
Rename
V-AUX
—
I/O Assignment
Audio Select
Decoder Mode
Volume Trim
Rename
DOCK
—
Volume Trim
Rename
NET/USB PC/MCX Volume Trim
Play Style
NET RADIO Volume Trim
USB USB Select
Volume Trim
Play Style
Notes
I/O Assignment
Audio Select
Decoder Mode
Coaxial Input
Optical Input
Optical Output