Using the gui remote control, Gui remote control operations – Yamaha DSP-Z9 User Manual
Page 31
USING THE GUI REMOTE CONTROL
29
English
PRE
P
ARA
T
ION
The GUI (graphical user interface) remote control
provides a simple and convenient way to control this unit
while viewing a GUI display on your video monitor. You
can use the following steps to:
• Configure i.LINK connections
• Select and configure sound field programs
• Select and configure input sources
• Manually configure your system settings
• Automatically set up your system
• Protect your system settings
• Display information about audio and video signals
1
Switch on this unit and your video monitor.
Make sure the GUI is displayed.
2
Press TOP.
The TOP display appears.
3
Press
k
/
n
repeatedly to select a category
(i.e., Manual Setup), then press
h
to enter
the selected category (i.e., Basic).
USING THE GUI REMOTE CONTROL
GUI remote control operations
POWER
TOP
EXIT
SYSTEM
STANDBY
ENTER
3-5
6
2
1
ENTER
ENTER
00EN.00_DSPZ9_GB.book Page 29 Thursday, November 13, 2003 10:55 AM