Yamaha DSP-Z9 - Manual (Page 42)

40
PLAYBACK
■ Remote control operation
Set 10KEY/AMP to AMP, then press one of the
sound field program buttons repeatedly to select
the desired program.
The name of the selected program appears on the front
panel display and on the video monitor.
y
• You can also perform these operations using the GUI remote
control (see page 29).
• Choose a sound field program based on your listening
preference, and not on the name of the program.
• When you select an input source, this unit automatically selects
the last sound field program used with that source.
• Sound field programs cannot be selected when PURE DIRECT
is selected.
• 128 kHz, 176.4 kHz and 192 kHz sampling frequencies are
sampled down to half their original sampling frequency before
sound field programs are applied.
• DSD signals are converted to PCM (88.2 kHz) before sound
field programs are applied.
■ Enjoying multi-channel software
If you connected a surround back speaker, use this feature
to enjoy 6.1/7.1-channel playback for multi-channel
sources using the Dolby Pro Logic IIx, Dolby Digital
Surround EX or DTS ES decoders.
Press EX/ES on the remote control to switch
between 5.1- and 6.1/7.1- channel playback.
To select a decoder, press l / h repeatedly
when PLIIx Movie (etc.) is displayed.
AUTO
When a signal (flag) that can be recognized by the unit is
input, the unit selects the optimum decoder for playing
back the signal in 6.1/7.1 channels.
If the unit cannot recognize the flag or no flag is present in
the input signal, it cannot automatically be played in 6.1/
7.1 channels.
Decoders (select with l / h )
You can select from the following modes depending on the
format of the software you are playing.
PLIIx Movie
For playing back Dolby Digital, DTS or analog
multi-channel signals in 7.1 channels using the Pro
Logic IIx movie decoder.
PLIIx Music
For playing back Dolby Digital, DTS or analog
multi-channel signals in 6.1/7.1 channels using the
Pro Logic IIx music decoder.
EX/ES
For playing back Dolby Digital or analog multi-
channel signals in 6.1/7.1 channels using the Dolby
Digital Surround EX decoder.
DTS signals are played back in 6.1/7.1 channels
using the DTS ES decoder.
EX
For playing back Dolby Digital or DTS signals in
6.1/7.1 channels using the Dolby Digital Surround
EX decoder.
OFF
Decoders are not used to create 6.1/7.1 channels.
y
When Surround Back is set to “Large x1” or “Small x1” (see
page 68), the surround back channel is output from the left
SURROUND BACK speaker terminals.
Notes
STEREO
EX/ES
AMP 10KEY
JAZZ
MOVIE THX
MUTE
VOLUME STRAIGHT
TV INPUT
TV VOL CH
PRESET
DISC EFFECT
ON SCREEN
TEST SLEEP
TV MUTE
MUSIC ENTERTAIN ROCK
HALL#1 HALL#2 CHURCH
NIGHT /DTS
CHP/INDEX
A/B/C/D/E
1
5
9
6
0 +10 +100
7 8
2 3 4
SPEAKERS A B
PUSH
Sound field
program
buttons
10KEY/AMP
J A Z Z C L U B
MULTI CH V–AUX DVR VCR 1 VCR 2 DTV/LD SAT CABLE DVD MD/TAPE CD–R CD TUNER PHONO
HiFi DSP
R L C
SL SR
VOLUME
LFE A SP
V i l l a g e G a t e
Program name
STEREO
6.1/5.1
AMP 10KEY
JAZZ
MOVIE THX
MUSIC ENTERTAIN ROCK
HALL#1 HALL#2 CHURCH
NIGHT /DTS
CHP/INDEX
1
5
9
6
0 +10 +100
7 8
2 3 4
EX/ES
CHP/INDEX
00EN.00_DSPZ9_GB.book Page 40 Thursday, November 13, 2003 10:55 AM