Yamaha DSP-Z9 - Manual (Page 46)

44
PLAYBACK
This unit comes with a variety of input jacks. Do the
following to select the type of input signals you want to
use.
1
Select the input source.
2
Press INPUT MODE (or INPUT MODE when
10KEY/AMP is set to AMP) to select an input
mode.
In most cases, use Auto.
Auto Automatically selects input signals in the
following order:
1) i.LINK
2) Dolby Digital RF
3) Digital signals*
4) Analog signals
i.LINK Selects only i.LINK signals. If no i.LINK
signals are input, no sound is output.
D.D.RF Selects only Dolby Digital RF signals. If no
Dolby Digital RF signals are input, no
sound is output.
DTS Selects only digital signals encoded in DTS.
If no DTS signals are input, no sound is
output.
Digital Selects digital signals input from the
OPTICAL or COAXIAL jacks. Use if
i.LINK or Dolby Digital RF signals are also
being input.
Analog Selects only analog signals. If no analog
signals are input, no sound is output.
* If this unit detects a Dolby Digital or DTS signal, the
decoder automatically switches to the appropriate sound
field program.
y
• You can adjust the default input mode this unit selects when the
power is turned on (see page 76).
• If MULTI CH IN is selected, you cannot change the input
source using INPUT SELECTOR. Press MULTI CH IN on the
remote control or MULTI CH INPUT on the front panel to
remove the selection.
• You can also perform this operation using the GUI remote
control (see page 29).
• When playing back CD or LD sources encoded in DTS, set the
input mode to DTS.
• If the digital output data of the player has been processed in any
way, you may not be able to perform DTS decoding even if you
make a digital connection between this unit and the player.
• When “STEREO Direct ---” is selected, playback is not
possible in the following cases:
– For Dolby Digital playback in DDRF mode
– For DTS playback in DTS mode
– For all other compressed signal streams
Selecting input modes
INPUT SELECTOR
TUNER PHONO
CD
DVD DVR VCR 2 DTV/LD VCR 1
CD-R MD/TAPE SAT CABLE
V-AUX
or
Front panel Remote control
I n p u t D V D
MULTI CH V–AUX DVR VCR 1 VCR 2 DTV/LD SAT CABLE DVD MD/TAPE CD–R CD TUNER PHONO
R L C
SL SR
VOLUME
LFE
A
SP
A u t o : D T S
Front panel Remote control
or
Input mode
INPUT MODE
MULTI CH IN PURE DIRECT
TOP EXIT INPUT MODE
SOUND
TITLE
MENU
CHAPTER
PAUSE STOP POWER REC
STEREO AMP 10KEY HALL 1 HALL 2 CHURCH
SELECT
DISPLAY
SEARCH
SOURCE
PLAY
– +
ENTER
1 2 3 4
Notes
00EN.00_DSPZ9_GB.book Page 44 Thursday, November 13, 2003 10:55 AM