Yamaha Pocket Recorder - Manual (Page 21)

Recording Settings
POCKETRAK CX Reference Manual
21
Setting the recording peak limiter
When the recording peak limiter is set to ON, the recorder reduces sound distortion by automat-
ically adjusting excessive peaks. It is recommended that you set the limiter to ON when you are
recording audio. The peak limiter is available only when the ALC is set to OFF.
Procedure:
Press the [MENU/ENTER] button for at least two (2) seconds
while the main screen is displayed, select [REC MENU]
→ [REC
LIMITER] → [ON], then press the [MENU/ENTER] button.
To cancel the recording peak limiter, select [OFF].
Setting the High Pass Filter (HPF)
You can cut the low frequency range by switching the High Pass Filter on. The filter reduces the
level of chatting voices, wind and other noise in the recording environment and enables you to
record clearer audio.
Procedure:
Press the [MENU/ENTER] button for at least two (2) seconds
while the main screen is displayed, select [REC MENU]
→ [HPF
(High Pass Filter)] → [ON], then press the [MENU/ENTER] but-
ton.
To cancel the High Pass Filter, select [OFF].
Setting Stereo Wide recording
Recording with the STEREO WIDE option set to ON will enhance and widen the stereo image of
the recorded sound.
Procedure:
Press the [MENU/ENTER] button for at least two (2) seconds
while the main screen is displayed, select [REC MENU]
→ [STE-
REO WIDE] → [ON], then press the [MENU/ENTER] button.
To cancel the stereo wide setting, select [OFF].