Yamaha Pocket Recorder User Manual
Page 77
Appendix
POCKETRAK CX Reference Manual
77
The file transfer speed (from the computer to the unit) is slow.
Possible cause
The unit is connected to a USB1.1 terminal on the computer.
Corrective action
Connect the unit to a USB2.0 High Speed terminal.
When the unit is connected to the computer, the unit does not display the “Connected” icon.
Possible cause
The unit is not connected to the computer correctly.
Corrective action
In some cases, the unit may not display the “Connected” icon or may not
be recognized when it is connected to a computer. Disconnect the unit
from the computer, then reconnect it.
The recorded sound is distorted.
Possible cause
The microphone sensitivity level may not be appropriately set.
Corrective action
• Set the [MIC SENS] (microphone sensitivity) switch to [LOW]. If you still
hear distortion, set the High Pass Filter to ON and attach the wind-
screen to the recorder (see
• If the ALC function is turned off, set the recording peak limiter to ON
(see
The recorded sound skips.
Possible cause
• The microSD card was formatted not on the recorder, but on a com-
puter or other device.
• The microSD card may be fragmented significantly.
Corrective action
Use the recorder to format the microSD card (see
The date and time are displayed incorrectly.
Corrective action
Set the correct date and time (see
Deleting files does not increase the amount of free space.
Possible cause
The Recycle Bin function is turned on.
Corrective action
).