Yamaha Pocket Recorder - Manual (Page 47)

Using the Timer Functions
POCKETRAK CX Reference Manual
47
Using the Timer Functions
Programming Timer recording
Timer recording enables you to set the recorder so that it will start recording at the specified
time. Before you proceed, make sure that the current date and time on the unit have been set
correctly (see
page 9 ).
1.
Press the [MENU/ENTER] button for at least two (2)
seconds while the main screen is displayed, press
the [VOL +/-] buttons to select [COMMON MENU]
→ [TIMER & ALARM], then press the [MENU/ENTER]
button.
2.
Press the [VOL +/-] buttons to select [TIMER REC],
then press the [MENU/ENTER] button.
The recorder displays the timer indicator.
3.
Specify the recording start time ([START TIME]).
Press the [
]/[ ] buttons to select the hour or
minute, use the [VOL +/-] buttons to set the value, then
press the [MENU/ENTER] button.
Note:
· You can program the time up to 24 hours ahead.
4. Specify the recording time duration ([REC TIME]).
Press the [
]/[ ] buttons to select the desired
recording time duration from “30m,” “1h,” “2h” or
“MAX” (recording continues until the available space
used up). Then press the [MENU/ENTER] button.
5.
When the unit displays [SELECT FOLDER], press the
[
]/[ ] buttons to select the desired folder into
which to record, then press the [MENU/ENTER] but-
ton.
Timer recording is now programmed. At the programmed
time, the recorder automatically starts to record, and a
new file is created in the specified folder. (The timer indica-
tor (
) will flash during Timer recording.
Note:
· You cannot select the LINE (L), MUSIC (M) or Recycle Bin ( ) folders for Timer recording.
Timer indicator
Recording time