Yamaha Pocket Recorder - Manual (Page 30)

Playback Settings
POCKETRAK CX Reference Manual
30
Playing back specific sections of a track
You can specify and quickly locate a desired section of a track in three ways. This can be useful if
you want to skip unimportant parts during playback or to repeat playback of a particular portion
of the file. The POCKETRAK CX features three special playback functions: Skip playback (locating
the playback point immediately), A-B Repeat playback (playing a specified part repeatedly), and
Phrase playback (moving the playback point back by a specified number of seconds).
Using the Skip playback function
You can skip forward or back by a specific amount of time. This function is useful
when you want to locate a desired playback point immediately.
1. During playback, press the [ ]/[ ] buttons.
Playback will skip ahead or back by the specified amount of time.
Note:
· The playback point will not skip to the next or previous folder. The function is effective
only within one folder.
· If the distance between the current point and an index mark or the beginning of the
next file is shorter than the distance between the current point and the skip point, the
recorder will locate the index mark or the beginning of the next file.
■
Setting the amount of time for Skip playback
1. Press the [MENU/ENTER] button for at least two
(2) seconds while the main screen is displayed,
select [PLAY MENU]
→ [SKIP PLAY], then press the
[MENU/ENTER] button.
2.
Press the [VOL +/-] buttons to select a skip time
value of “30 sec,” “1 min,” “10 min” or “30 min,”
then press the [MENU/ENTER] button.
3.
Press the [STOP/ESC ] button twice.
The unit displays the main screen, including the
indicator in the lower-right corner.
Hint:
· You can set the skip time value by displaying the menu screen during playback.