Adjusting the lcd contrast, Initializing the menu settings, Checking the firmware version – Yamaha Pocket Recorder User Manual

Page 53

Advertising
background image

About the Menu Settings

POCKETRAK CX Reference Manual

53

Adjusting the LCD contrast

You can adjust the LCD contrast on a scale of ten (10).

1.

Press the [MENU/ENTER] button for at least two (2) sec-
onds while the main screen is displayed, press the [VOL
+/-] buttons to select [COMMON MENU]

[CON-

TRAST], then press the [MENU/ENTER] button.

2.

Press the [

]/[

] buttons to adjust the contrast,

then press the [MENU/ENTER] button.
L (low): 1 – H (high): 10

Initializing the menu settings

Initializing the recorder settings will restore all menu settings (excluding the date and time set-
ting) to the factory default.

Note:

· Initializing the recorder settings will not delete any data on the microSD card. For infor-

mation on initializing a microSD card, refer to

page 46

.

Procedure:
Press the [MENU/ENTER] button for at least two (2) seconds
while the main screen is displayed, press the [VOL +/-] buttons
to select [COMMON MENU]

→ [MENU RESET] → [YES], then

press the [MENU/ENTER] button.
If you decide not to initialize the settings, select [CANCEL].

Checking the firmware version

You can check the version number of the recorder’s firmware by following the procedure below.

Procedure:
Press the [MENU/ENTER] button for at least two (2) seconds
while the main screen is displayed, press the [VOL +/-] buttons
to select [COMMON MENU]

→ [VERSION], then press the

[MENU/ENTER] button.
The firmware version will be displayed.

Advertising