SUUNTO X6HR User Manual
Page 13
1.5. BATTERY REPLACEmENT OF THE TRANSmITTER BELT
the transmitter belt operates on a 3-volt lithium cell, type: Cr 03.
the transmitter belt’s average expected battery life is 300 hours of use in ideal operating
temperatures.
When Suunto X6
hr
is not receiving a signal but the transmitter belt is active, a change
of battery might be necessary. refer to chapter .4.. for other factors that may interfere
with the correct signal.
to change the battery:
. Insert a coin into the slot located on the battery compartment cover on the backside
of the transmitter belt.
. turn the coin counterclockwise until it is aligned with the open position marker, or
even slightly further for easy opening.
3. remove the battery compartment cover. ensure that the O-ring and all surfaces are
clean and dry. Do not stretch the O-ring.
4. Carefully remove the old battery.
5. Place the new battery into the battery compartment with the positive side facing
up.