SUUNTO X6HR - Manual (Page 42)

40
3.5. HIkING mODE
3.5.1. main Display
When you select the Hiking mode, the main display opens. the main display has
three rows.
Ascent/descent rate
the first row displays the ascent/descent rate in the selected unit. for more information
about defining the ascent/descent rate unit, refer to chapter 3..6.
Altitude
the second row displays the altitude. for more information about defining the altitude
unit, refer to chapter 3..6.
Shortcuts
the third row contains shortcuts to three functions. to change the function, press
Stop/CL.
• Asc: the cumulative ascent since the logbook was started. If the logbook is not
running, the display shows text “
asc
0”.
• Differ: When you select the Differ function, it displays the difference in altitude and
time since the last reset of the function. to reset and start a new measurement, press
Start. Differ is always in the measuring mode, i.e. it measures the time and altitude
difference constantly but displays them only when you select the function.
Both hours and minutes are displayed during the first 0 hours. During the next 89 hours,
only hours are displayed. finally, the display shows only a dash and letter ‘h’.
• Time/Heart Rate: Displays the current time. If the heart rate monitor is receiving a
heart rate signal, this row displays the heart rate instead of time.