SUUNTO X6HR - Manual (Page 49)

47
3.6. CHRONO
3.6.1. main Display
When you select the Chrono mode, the main display opens. the main display has
three rows.
Altitude
the first row displays the altitude in the selected unit. for more information about
defining the altitude unit, refer to chapter 3..6.
Stopwatch
the second row displays the total time or split time. the split time is the time from the
start of the timing to this moment. When you navigate to the main display, the time on
the second row is either 0.00,0, the time of the previous timing, or, if the stopwatch has
already started, a running time. the time starts running when you press Start.
If you want to record a split and lap time, press Start again. the time on the middle
row stops for 3 seconds to display the split time, displays the lap time for another
3 seconds and then starts running again.
When you want to stop the timing, press Stop/CL while in the Chrono mode. the stop
time is then displayed on the second row. You can zero the display by long pressing
Stop/CL.
NOTE: If you want to continue the same timing after stopping it, press Start instead
of zeroing the display.
NOTE: You must have free space in the memory to be able to start the timing. If the
memory is full, the message “
memory full
” is displayed and the Suunto X6
hr
suggests
the oldest memory file to be erased. Erase the suggested file by pressing Suunto or