SUUNTO X6HR - Manual (Page 30)

8
barometric pressure measured with a certificated high-accuracy barometer. You can
set the value by 0, hPa or 0,0 inHg steps. the reference value should be measured
with at least the same accuracy. If you are uncertain, contact the Suunto technical
service before changing the calibration.
to change the pressure sensor calibration:
. In the function menu, scroll to General and press Suunto. the General menu is
displayed.
. Scroll to Sensor and press Suunto. the text s
ensor
c
alibration
appears and the
current measured absolute air pressure is displayed as active.
3. With the arrow buttons, set the absolute air pressure value to match the measured
reference value and press Suunto. You return to the function menu.
NOTE: You can return the original calibration by scrolling the sensor calibration value
until text DEFAULT is displayed in the middle row.
3.2.6. Units
the units menu includes the units that are used with all the Suunto X6
hr
functions
and settings. the unit settings affect the way information is displayed in all the Suunto
X6
hr
modes.
Setting the time format
the time setting defines whether the - or 4-hour display is used.
to change the /4-hour display:
. In the function menu, scroll to Units and press Suunto. the Units menu is
displayed.
. Scroll to Time and press Suunto. the /4 h field is activated.