SUUNTO X6HR - Manual (Page 54)

5
to quit erasing at any point, press Stop/CL to return to the function menu.
Setting the recording interval
the recording interval defines how often the information is saved to the memory when
the timing is running. the recording interval is either , 0 or 60 seconds. If you change
the interval while the stopwatch is running, the change does not affect the current
recording. the change applies to the next stopwatch recording.
to set the interval:
. In the function menu, scroll to Memory with the arrow buttons and press Suunto.
the memory menu is displayed.
. Scroll to Interval and press Suunto.
3. Select the interval with the arrow buttons and press Suunto.
the memory capacity is 4h 0 min with  s recording interval,  h with 0 s interval
and 33 h with 60 s interval. these values are approximate, depending on how many
lap times you record in the memory. When you select the recording interval, the exact
free memory capacity is displayed on the bottom row of the Interval menu of the
memory function.
3.6.3. Altitude
With this function you can set the reference altitude. for more information about the
reference altitude, refer to chapter 3.3.3.
3.6.4. Use Alti/Baro
With the Use function you can define whether the air pressure measurement is used to
represent the altitude or the weather conditions. When the Chrono is on, it is advisable
to activate the alti use. for more information, refer to chapter 3.3..